Every winter, customers will reflect the realistic dinosaurs models will have a variety of problems, partly because of improper operation caused by, and partly because of the failure of the climate. How can we use it correctly, roughly divided into the following three parts!
1. the controller part
Each will move will call the realistic dinosaur model can not be separated from the controller, most manufacturers of the controller is placed next to the dinosaur, due to the dry winter temperatures, morning and evening temperature difference, and the dinosaur internal lubricant is dry. During the use of dinosaur load increases, resulting in the controller main board breakdown dinosaur does not move, the correct use is to try to choose the noon temperature is high, when the load is small.
2. first remove snow before use
Realistic dinosaur model internal is made of steel frame + motor, motor have a specified load, if the winter snow, dinosaurs produce a lot of snow, the administrator did not promptly clean up the snow to dinosaur power, prone to two problems, the motor is easy to overload burned, or motor load, the transmission device top bad, the correct use of winter is to remove the snow before power.
3. Repairing broken skins
Use 2-3 years of dinosaurs, inevitably the body will be incorrectly played by tourists resulting in broken epidermis, epidermis broken holes. To prevent water from flowing into the interior and damaging the motor when the snow melts in winter. When winter comes, it is necessary to repair the dinosaur skin. Here we have a very simple repair method, first use needle and thread to sew up the broken place, then use glass glue to apply a circle along the seam.
Here, the realistic dinosaur model manufacturers recommend that, if possible, the winter is used sparingly or even not, and as far as possible do not suffer directly in the icy world, encountering cold winter temperatures will accelerate aging and lead to a shorter life.